Fitting Cat Flap In UPVC Door Panel
Cat flaps let your pet come and go whenever they want without having to let him in or out. They also can help stop your cat from urinating inside the home.
It is much easier to put the cat flap on a upvc panel than a glass one, but you will require some expertise and correct tools.
Measure the Door
fitting cat flap in upvc door panel (www.Instapaper.com) a cat flap in the door can be a challenge but if you choose the right type of cat flap, take your time and follow the steps provided it shouldn't be too difficult. We will show you how to mark the shape and use an jigsaw to cut the door's opening. Then we will finish the job by attaching the cat flap. This will ensure that the flap stays in position and shields the doors from damage caused by wind and rain.
The first thing to do is take a measurement of the width of your pet to get an accurate measurement of what size of cat flap installers near me flap you'll need. This will ensure that the flap is big enough to let your pet go inside and out of the house without having to open or close the door every time, but also small enough to stop them from moving too far either way.
If your kit comes with a drawing showing where to drill, you can stick it on the door, and then use a pencil around it. If your door has moulding or sill on the bottom of it then make sure you have clearance from these to keep your cat safe and will prevent them from getting access to your home.
Then put on your eye protection and a dust mask, and using a jigsaw, begin cutting along the line that you've drawn in, but don't push the blade too hard as this will make it cut faster than you would like it to. If you have a square that you have cut, use it to check that you're cutting properly and also to ensure that the hole is a proper rectangle. Once you are happy with this you can begin to take off the remaining door material.
Draw a Line
The cat flap is a great way to allow your pet to go in and out without having to worry about them being a nuisance to a visitor, or leaving unwanted gifts inside the home. It also reduces drafts and helps to keep the temperature in your home in a stable manner. However, putting an animal flap on your door could be an overwhelming task for those who have never done it before, which is why many people to seek out a professional joiner or carpenter to complete the task. While this is definitely an option, it's possible to do the job yourself if you have the appropriate tools and follow the instructions carefully.
It is much easier to accomplish on a wooden door, but it is possible with upvc door panel with cat flap. However you should be cautious not to damage the doors as this could invalidate your guarantee. The first step is to take measurements of the door to make sure it will accommodate the new cat flap fitters-flap. This isn't too difficult if you are using the standard uPVC door, but you may need to take extra care if you are using an insulated or composite kind of door, as they are more difficult to cut into than solid uPVC panels.
The next step is to determine the height of your belly for your cat. This is the distance from the floor to the bottom of the cat's stomach and you'll need to locate a place near the door that will be within the range your cat is able to comfortably walk through. Once you know this then you be required to mark the area using pencil and a spirit level to ensure that the hole you will make will be a good fit for your cat.
Once you have marked out the area, it is time to cut the hole. You will require an jigsaw. It is crucial to take your time in order to ensure that the cuts are smooth and clean instead of rough and uneven, as it could cause damage to your door. Be sure to wear safety glasses and a dust protection mask at all times when using the jigsaw, as breathing in the dust could be hazardous to your health. After you've completed the cutting process, you will need to smooth out the edges of the hole with sandpaper, so that your cat flap will fit easily into place.
Cut a hole
Getting a cat flap fitted to an existing door panel or double glazing sealed unit can be difficult. If you are not very experienced in DIY, it is recommended to hire an expert to do the job for you. A faulty job can not only be ugly but also pose an security risk. It could let cold air in when the cat is outside and hot air out when the cat is inside.
The first thing you need to do is draw the position of the hole in the door using an eraser and an ax level. This will ensure that it is correctly placed and runs flush with all other parts of the door. You should make sure you have a piece of sandpaper at the ready for any rough edges.
After the line is marked you should cut out the hole with a jigsaw, remember to wear any necessary safety equipment when working with the power tool. If you are concerned about the noise of the jigsaw, you can purchase an electric version that is much quieter and easier to use.
It is important that you only remove the material required to fit the cat flap. It is essential to leave a little extra material for the wall thickness of the flap. However cutting away too much could cause issues or even damage the door frame.
A door made of upvc could include a metal frame, or a panel inside that could interfere with the microchip cat flap if this is the case you'll need to make an oversize hole so that the metal doesn't come into contact with the wall of the cat flap. If this is the case, it is crucial to fill in the gap and seal it with water.
If you're installing a cat flap into a upvc door or double glazed window with a metal frame, you'll need to speak to a specialist who can provide you with a new pane of glass that already has the hole for the cat flap premade in it. This will be cheaper than trying to install a cat flap inside an existing pane of glass that was not made specifically for this purpose.
Place the Flap
Cat flaps give your pet the freedom to move around whenever they like, allowing them to relax at home whenever they want to. If you've got a uPVC door, it might be difficult to fit a cat flap, particularly when you don't have a glass pane that can be cut for one. If you're willing to install a half-glazed uPVC replacement panel, it is possible to add the cat flap. It's not as simple as cutting a hole in the door however, and there are some things you'll need first to ensure that it's safe.
A uPVC, GRP or composite door panel typically comprises an extremely thin plastic outer skin bonded to a soft insulating polystyrene core. The material is quite fragile and care must be taken when cutting into it to avoid causing damage. This kind door has a template can be used to cut the hole.
Once you've determined the position of the hole in your door, it's now time to install the flap. You can choose from a wide range of options, from simple push-button units to microchip-activated ones that allow your pet in. However, no matter what kind of cat flap you pick, it's crucial to ensure that your cat can use the flap and not get trapped outside in bad weather.
A circular fitting is better than a square because circles can be cut more securely into glass. This is because square holes leave the glass vulnerable to cracking if a drill is used on it. This is also a safer option because you won't need to drill into the toughened glass, which could break and cause harm to your pet or family members. This is particularly important if you have a young or elderly person in your home who could be injured by shards glass.